I have a customer that is being routed via LAX while they are located on Cox within Phoenix. I was able to get a MTR from them:
1. AS??? 172.24.128.1 0.0% 20 0.2 0.2 0.2 0.4 0.0
2. AS??? 192.168.1.1 0.0% 20 0.6 0.7 0.6 2.5 0.4
3. AS22773 ip98-171-91-129.ph.ph.cox.net (98.171.91.129) 0.0% 20 4.4 4.7 2.1 23.8 4.7
4. AS22773 184.185.66.166 0.0% 20 4.6 3.9 1.9 7.4 1.5
5. AS22773 wsip-184-178-207-128.ph.ph.cox.net (184.178.207.128) 0.0% 20 1.6 2.7 1.2 4.2 0.9
6. AS??? 100.120.101.8 0.0% 20 2.4 4.1 1.9 16.5 3.1
7. AS??? 100.120.100.12 0.0% 20 3.3 3.2 1.8 6.3 1.1
8. AS??? ??? 100.0 20 0.0 0.0 0.0 0.0 0.0
9. AS7922 be-200-pe11.600wseventh.ca.ibone.comcast.net (50.248.118.9) 0.0% 20 16.8 15.5 14.0 17.0 1.0
10. AS7922 be-3412-pe12.600wseventh.ca.ibone.comcast.net (96.110.33.78) 0.0% 20 16.8 15.4 14.1 16.8 0.8
11. AS??? ??? 100.0 20 0.0 0.0 0.0 0.0 0.0
12. AS40509 ip-137-66-7-137.customer.flyio.net (137.66.7.137) 0.0% 20 13.9 14.6 13.5 16.0 0.8
It’d be much appreciated if you could take a look into tuning this route. I should be able to verify a fix either from my backend or following up with them. Thanks!